PSA: I blew $340 on a bootleg control board for a dishwasher that didn't even match
Learned this one the hard way last month on a KitchenAid job in Rochester. Customer's board was dead so I grabbed a replacement off a third party site for $340, thinking I was saving him $150 over the OEM part. The harness plug was close but the pin spacing was off just enough that I had to shave the connector down to get it to seat. Fired it up and it ran through one cycle, then threw the same error code the old board did. Turned out the board was a knockoff with a different firmware version, and the seller's return window was 14 days, which I was already past. I ended up eating the $340 and ordering the real board, so the customer got a discount and I got a lesson. Anybody got a supplier they actually trust for boards, or do you just bite the bullet and go OEM every time?